TOPIC: Thermal Imaging inspection information

Re: Thermal Imaging inspection information 14 years 11 months ago #12424

William R. DeVries
Offline
Senior Member
Posts: 76
Thank you received: 0

education is the main focus, get your basic from John if you want then your level one, do the building science, then building diagnostics part one ( envelope) part two ( roofs) then a year will have passed and get your level two. Will cost you in the area of 7500.00 but if your doing IR and want to be good at it this is one path to follow.
Buy the most expensive camera you can afford with the best resolution, any of the b-cam sd, b50, b60 all in the under 10k region. It will pay for itself.

Please Log in to join the conversation.

Certified level I Thermographer (FLIR)
Certified Home Inspector #07040201
Certified Mold Inspector #7310 (ESA)
Certified Commercial Inspector
IAQ, Radon, Asbestos, lead

Re: Thermal Imaging inspection information 14 years 11 months ago #12496

Jay Markanich Offline Platinum Member Posts: 2552 Karma: 1 Thank you received: 0	WooHoo DeVries! Good job... Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation. Jay Markanich Real Estate Inspections, LLC Based in Bristow, serving all of Northern Virginia www.jaymarinspect.com Northern Virginia Home Inspector Festina Lente - Make Haste Slowly

Page:
1
2

Support

Message Boards

Home Inspection Questions

Inspection Discussion

Thermal Imaging inspection information

Time to create page: 0.175 seconds