• 888-750-4777
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Drill holes in furnace ducts?

Re: Drill holes in furnace ducts? 11 years 8 months ago #30449

4 years ago when I had my home inspected before buying, the HI used an awl to punch through the ductwork...I was not a happy camper and made that very clear to him.

I also use an IR thermometer and extending mirror to check as much as I can on the furnace...

Please Log in to join the conversation.

Title: Root River Inspections
URL:  www.arochestermnhomeinspector.com
Body:  Root River Inspections serves Rochester, Winona, Red Wing, Austin, Albert Lea and surrounding Minnesota areas.
Meta Key:  Rochester home inspector, Winona home inspector, Red Wing home inspector, Albert...

Re: Drill holes in furnace ducts? 11 years 8 months ago #30451

That's an old technique Casey, and the thermometer looks like a mini meat thermometer.  The old-time HVAC techs used to stick it in there and watch the dial.  Your guy may have been a former HVAC pro and that was the only way he knew how to do it.  Wouldn't be so bad if he had a roll of aluminum tape to cover over the hold.  The really experienced guys drilled a specific hole and when done put a small rubber button inside that could be removed and re-used each time they came back to service the system.

Please Log in to join the conversation.

Jay Markanich Real Estate Inspections, LLC
Based in Bristow, serving all of Northern Virginia
www.jaymarinspect.com
Northern Virginia Home Inspector
Festina Lente - Make Haste Slowly
  • Page:
  • 1
  • 2
Time to create page: 0.194 seconds
© 2004-2021 Home Inspector Pro Inc. All Rights Reserved.