• 888-750-4777
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Drill holes in furnace ducts?

Drill holes in furnace ducts? 14 years 1 hour ago #30380

  • Bert de Haan
  • Bert de Haan's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • If it is worth doing, it's worth doing well.
  • Posts: 741
  • Thank you received: 0
Do any of you drill holes in the supply duct (and later fill with caps) to measure temperature rise or to insert a scope to possibly see the heat exchanger?

Please Log in to join the conversation.

Bert de Haan
www.KitchenerWaterlooHomeInspector.ca
Benchmark Home Inspection Services Kitchener-Wateroo and Guelph area Home Inspection
Serving Kitchener-Waterloo, Guelph, Orangeville, Mount Forest and surrounding areas.
Keywords: Kitchener-Waterloo home inspector, Guelph home inspection,...

Re: Drill holes in furnace ducts? 13 years 11 months ago #30384

I check the heat/cool changes with an infrared thermometer and I have a telescoping mirror to see the heat exchanger.

Please Log in to join the conversation.

Jay Markanich Real Estate Inspections, LLC
Based in Bristow, serving all of Northern Virginia
www.jaymarinspect.com
Northern Virginia Home Inspector
Festina Lente - Make Haste Slowly

Re: Drill holes in furnace ducts? 13 years 11 months ago #30425

  • Ian Niquette
  • Ian Niquette's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Just another goofy lookin guy with no hair!!
  • Posts: 1355
  • Thank you received: 0
I would not drill holes in any heat ducts. In most situations your client does not own the home, so you would need permission to do that from the seller, as they would probably not be happy if you drilled holes in the heating ducts and then your client walked for whatever reason.

Please Log in to join the conversation.

Square One Home Inspection
Square One Home Inspection proudly serves Green Lake, Fond du Lac, Dodge, Marquette, Columbia, Winnebago, and Waushara Counties. Complete home inspections, thermal imaging and Radon testing available.
www.squareonehomeinspection.com
Keywords : Fond du Lac Home Inspection,...

Re: Drill holes in furnace ducts? 13 years 11 months ago #30436

  • Bert de Haan
  • Bert de Haan's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • If it is worth doing, it's worth doing well.
  • Posts: 741
  • Thank you received: 0
Thanks.  I have heard of people doing it so I got to wondering.  Jay, with your infrared thermometer, do you measure the temperature of the outside of the duct?  Wouldn't the duct itself have a temperature somewhere between the air inside the duct and the air outside the duct? 

Please Log in to join the conversation.

Bert de Haan
www.KitchenerWaterlooHomeInspector.ca
Benchmark Home Inspection Services Kitchener-Wateroo and Guelph area Home Inspection
Serving Kitchener-Waterloo, Guelph, Orangeville, Mount Forest and surrounding areas.
Keywords: Kitchener-Waterloo home inspector, Guelph home inspection,...

Re: Drill holes in furnace ducts? 13 years 11 months ago #30439

As a generalist I operate the HVAC systems under normal testing, I turn on the thermostat, check air flow, take a picture of the temperature of my laser thermometer at a register to show the system heated, and or cooled on the day of inspection, I crank the thermostat so people complain it is to hot or to cold

I check the furnace cabinet and listen watch during the sequence of operation, check the filter.

I note that I do not inspect heat exchangers.
If I see no service records I recommend complete system evaluation to ensure proper operation.

I explain the systems need to be maintained and serviced on an annual basis.

I check the condensate and refrigerant lines.

I leave the drilling to the HVAC specialist as I am just a generalist.

Please Log in to join the conversation.

Home Safe Home Inspections
Link Url: Cleveland Home Inspector - www.hshinspections.net/
Body:Performing Home Inspections in Cleveland, Parma, Brecksville, Broadview Heights, North Royalton, Strongsville and surrounding areas.
Keywords:Parma,Broadview...

Re: Drill holes in furnace ducts? 13 years 11 months ago #30440

Bert - I don't measure during the heat season unless it is an old heat pump and I want to demonstrate the efficiency of the system to the buyer.  I try to get the end of the beam as far inside the duct as I can.  The same during AC to measure temperature differences between intake and register - as deep inside as possible.

As does Dave, if there is no service history sticker, I recommend an annual service contract if the unit is over 5 years old.

Please Log in to join the conversation.

Jay Markanich Real Estate Inspections, LLC
Based in Bristow, serving all of Northern Virginia
www.jaymarinspect.com
Northern Virginia Home Inspector
Festina Lente - Make Haste Slowly
  • Page:
  • 1
  • 2
Time to create page: 0.184 seconds
© 2004-2024 Home Inspector Pro Inc. All Rights Reserved.