TOPIC: Generate report

Generate report 7 years 4 weeks ago #63559

Tony Peluso
Topic Author
Offline
New Member
Posts: 1
Thank you received: 0

Hello everyone I cant get the report to be generated Did the usual program says report generated but adobe wont open and report is damaged if i go to docs to open. Using HIP for many years Did nothing new prior to problem Read info in trouble shoot section and did everything Still nothing. Any ideas Thanks

Please Log in to join the conversation.

Generate report 7 years 3 weeks ago #63563

Steve Kincaid Offline Junior Member Posts: 29 Thank you received: 3	Delete Adobe Reader. Reinstall Adobe Reader. See if that helps. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable. The following user(s) said Thank You: Tony Peluso
	Please Log in to join the conversation.

Generate report 7 years 3 weeks ago #63565

Stephen Stanczyk
Offline
Platinum Member
Posts: 580
Karma: 4
Thank you received: 6

Windows 10 and Adobe are not playing well together depending on the updates for both parties. About every other month I cannot open multiple PDF's at the same time until one or the other programs has been updated. Pain in the butt cause you never know when it is going to happen. In the mean time, just make sure no other PDF's are open when you go to generate the report. Good luck.

Please Log in to join the conversation.

There is nothing sweeter than the smell of fresh cut grass on a baseball infield, the click of a wooden bat and the taste of a hot dog at a warm sunny daytime double-header.

Page:
1

Support

Message Boards

Home Inspector Pro Software

Home Inspector Pro & HIP Mobile Questions

Generate report

Time to create page: 0.165 seconds